NEWS
05
2022
-
08
Now let's take a look at the preventive measures for the failure of the small oil pressure microswitch
Now let's take a look at the preventive measures for the failure of the small oil pressure microswitch
The small oil pressure microswitch is of great significance to the safe and reliable operation of the circuit breaker. The correct and reliable operation of the small oil pressure microswitch can make the entire power system run in a good state, and the value created will be far greater than the small oil pressure microswitch itself. From the analysis of the common problems of the small oil pressure microswitch in the hydraulic press mechanism of the circuit breaker, it can be seen that the failure of the small oil pressure microswitch may occur in the equipment manufacturing and installation stage, It may also occur in the operation and maintenance stage. In order to prevent equipment failures caused by oil pressure microswitch, the following three aspects can be taken into consideration.
1、 The acceptance of oil pressure miniature microswitch used for new network circuit breaker shall be strengthened. The type and quantity of newly installed oil pressure miniature microswitch contacts shall be correct, the switch action shall be stable without jamming, the action value and reset value shall comply with the relevant provisions of the manufacturer, the insulation resistance test shall be qualified, and the wiring shall be correct and firm.
2、 Strengthen the operation and maintenance of the small oil pressure microswitch, pay attention to the operating environment, check whether the waterproof, moisture-proof, dust-proof, and small animal proof measures of the cabinet where the small oil pressure microswitch is located are complete, whether the internal heating and dehumidification device operates normally, and whether there is condensation inside. If any abnormality is found, it should be handled in a timely manner. If the shell and base of the small oil pressure microswitch are loose or damaged, it should be replaced in a timely manner, and it is strictly prohibited to use a tie.
3、 Strengthen the maintenance management of small oil pressure microswitch, strictly follow the oil pressure maintenance, measure the action value of small oil pressure microswitch, strengthen the maintenance record management, do a good job in spare parts storage and management, and suggest that the replacement cycle of oil pressure microswitch be consistent with the maintenance cycle of substation equipment.
As a touch switch in the means of production, the four stages of its life cycle have the following characteristics:
1. Investment period: The investment period of touch switch is longer than that of other products. It takes a long time for each new product to be recognized by users.
2. Growth period: In this period, due to the good cultivation of the early market environment, product sales began to grow in a large scale, and the price level and profit margin remained at a high level.
3. Maturity period: The touch switch products entering the maturity period are generally products with low technology content at that time, and the technology of various manufacturers can be easily imitated. At this stage, many market followers and people who fill the vacancy begin to enter the market, and the market competition becomes more intense.
4. Decline period: After the design of a downstream complete machine is finalized, the touch switch used will not change for a long time. Therefore, as long as the whole touch switch machine has a market, the varieties of touch switches entering the decline period will have a market. In addition, each type of touch switch is generally used by multiple complete machines, so its decline period is relatively long.
If you need to purchase small oil pressure microswitch, please remember to consult our company. Preventive measures for microswitch failure
Recommended News