Every thing has its own value. In our daily life, there are many things and products that can not be separated. So in our family, there are also many objects that play their roles in different fields, and household appliance switches are no exception. Today, let's talk about the installation precautions of household appliance switches? If you are interested, please continue to read.

In each of our homes, sockets are needed, and there may be more than one. Therefore, the installation of such household appliance switches should meet the following requirements. When safety sockets are not used, the height of kindergartens, kindergartens, primary schools and other children's activities should not be less than 1.8 meters, and the socket panel should be close to the wall, with no gaps around, firm installation, smooth and clean surface, no damage, scratches, and complete decorative caps; The installation height of sockets in workshop and test (laboratory) shall not be less than 0.3m from the ground. The concealed sockets in special places shall not be less than O Installation height of 15m indoor same socket; The socket panel shall be flush with or close to the ground, and the cover plate shall be firmly fixed and well sealed. The installation of lighting switch shall comply with the following provisions: the installation position of the switch shall be convenient for operation, the distance between the edge of the switch and the edge of the door frame shall be 0.15~0.2m, the height of the switch from the ground shall be 1.3m, the height from the ground shall be 2~3m, and the height shall be less than 3m, the distance between the switch and the project board shall not be less than 100mm, and the cable outlet shall be vertical downward: the same type of parallel installation and the same type of indoor switch shall be installed at the same height, and the control sequence shall be correct. The distance between pull switches installed side by side shall not be less than 20mm. The concealed switch panel shall be close to the wall, with no gap around, firmly installed, smooth and clean surface, no damage or scratch, and complete decorative caps.

Then the installation of ceiling fans and other household appliances switches shall comply with the following provisions: the coating shall be complete, the surface shall be free of scratches and pollution, and the upper and lower bowls of the suspender shall be firmly installed in place: ceiling fans installed side by side in the same room shall have the same height and be controlled neatly. The installation of wall fan shall comply with the following requirements: the height from the lower edge of wall fan to the ground shall not be less than 1.8m. The coating is complete, the surface is free of scratches and contamination, and the protective cover is free of deformation. For the concealed switches and sockets of household appliances, it is necessary to connect the wires thrown out of the box with the switch and socket panel according to the wire requirements, push the switch or socket into the box (if the box depth exceeds 2.5cm, a sleeve box should be added), align the box eye, and fix it firmly with machine screws. When fixed, the panel shall be vertical and flush with the wall.

Our company adheres to the principle of "customer first, quality first", as always, to provide good products and services for enterprises, and is willing to make greater contributions to the national environmental protection cause. We hope that friends from all walks of life who sincerely care about and support the cause of our company can provide more cooperation opportunities. Welcome to visit and guide us to create a better tomorrow!